Release Notes

• Display iDRAC DNS name as the slot name.
• Option to view iDRAC LCLog results directly in CMC after applying a Server Configuration Profile.
• Support for Secure IOM mode. Secure IOM provides additional CMC security to support IOMs
running in UC-APL secured environments.
• Support for launching IOA GUI on the Homepage and I/O Module overview page.
Fixes
• Fixed an issue that caused the Server Profile page to hang when a profile is applied to multiple servers.
Version 1.33
• Fixed an issue that occasionally prevented CMC from applying the desired Fan PWM after a CMC reset.
Version 1.32
• Fixed an issue with Server/Host operating system (OS) network flap, which occurs occasionally on
Modular platforms for a short duration during CMC initialization.
• Fixed an issue with Server/Host OS network port off, which occurs after CMC is reset on full-height
Modular platforms when the second network daughter card is not installed.
• Fixed an issue causing the CMC Web GUI to becoming unresponsive while using Active Directory
login with WinRM.
• Fixed an issue causing memory full condition when the internal log files are oversized.
Version 1.30
• Fixed an issue with the “getmacaddress –m <server> –t iscsi” command displaying non-iSCSI MAC
addresses after using the iSCSI filter.
Important Notes
• CMC network default setting is Static with IP address of "192.168.0.120". Complete the CMC
network setup by directly connecting a client system on the same network. For more information,
see the Chassis Management Controller for PowerEdge FX2 Version 1.40 User's Guide available at
dell.com/support/manuals .
• Connecting the STK/Gb2 port of the CMC, located at the back of the chassis, to the management
network can cause network disruption if not properly cabled and configured in CMC. Before using
the STK/Gb2 port of the CMC, see the PowerEdge FX2 Version 1.40 Owner's Manual available at
dell.com/support/manuals.
• The PCIe cards are allocated to sleds based on the sled type, for more information, see the
Chassis Management Controller for PowerEdge FX2 Version 1.40 User's Guide available at
dell.com/support/manuals. This is applicable to Dell PowerEdge FX2s chassis.
• Some advanced features require CMC enterprise license. For more information about the CMC
licenses, see the Chassis Management Controller for PowerEdge FX2 Version 1.40 User's Guide
available at
dell.com/support/manuals .
• Storage features using Storage Sleds require a storage license. For more information about
storage licenses, see the Chassis Management Controller for PowerEdge FX2 Version 1.40 User's
Guide available at
dell.com/support/manuals .
• When Certificate Validation is “Enabled”, FQDN of the system should be provided. If the IP address
of the Domain Controller is specified when the certificate validation is enabled, the Active
Directory login may not work.