Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.40 for Dell PowerEdge FX2

NOTE: By default, TLS 1.1 and TLS 1.2 are supported in this release. However, to enable TLS 1.0 use the following

racadm command:

$ racadm config -g cfgRacTuning -o cfgRacTuneTLSProtocolVersionEnable TLSv1.0+

Supported firmware versions

The following table lists the firmware versions for BIOS, iDRAC, and Lifecycle Controller that support the servers listed:

Table 2. Latest Firmware Versions for BIOS, iDRAC, and Lifecycle Controller

Servers BIOS iDRAC Lifecycle Controller

PowerEdge FC830 2.2.5 2.40.40.40 2.40.40.40

PowerEdgeFC630 2.2.5 2.40.40.40 2.40.40.40

PowerEdgeFC430 2.2.5 2.40.40.40 2.40.40.40

PowerEdgeFM120 1.5 2.40.40.40 2.40.40.40

Supported Firmware Versions for Server Component Update

The following table lists the supported firmware versions for server components when CMC PowerEdge FX2/FX2s firmware is

updated from 1.3 to 1.4 version but the server components are not updated to the next version.

Table 3. Supported Server Component Versions for Server Component Update to N version

Platform Server Component Previous Component Version

(N-1 Version)

Updated Component Version

(N Version)

FD332 WN0HC 25.3.0.0016

25.4.1.0004

FC430 iDRAC 2.20.20.20

2.40.40.40

Lifecycle Controller 2.20.20.20

2.40.40.40

Diagnostics 4239A19

4239A33

BIOS 1.1.5

2.2.5

FC630 iDRAC 2.20.20.20

2.40.40.40

Lifecycle Controller 2.20.20.20

2.40.40.40

Diagnostics 4239A17

4239A33

BIOS 1.2.5

2.2.5

FC830 iDRAC 2.20.20.20

2.40.40.40

Lifecycle Controller 2.20.20.20

2.40.40.40

Diagnostics 4239A20

4239A33

BIOS 1.2.0

2.2.5

FM120x4 iDRAC 2.20.20.20

2.40.40.40

Lifecycle Controller 2.20.20.20

2.40.40.40

Diagnostics 4247A0

4247A1

BIOS 1.3.0

1.5

Supported Network Adapters

The following table lists the supported network adapters for PowerEdge FX2/FX2s.