Users Guide

○ Active Directory using Standard Schema or an Extended Schema (optional).
○ Hardware-stored user IDs and passwords.
● Role-based authority — Enables an administrator to configure specific privileges for each user.
● User ID and password configuration through the web interface. Web interface supports 128-bit SSL 3.0 encryption and
40-bit SSL 3.0 encryption (for countries where 128-bit is not acceptable).
NOTE: Telnet does not support SSL encryption.
● Configurable IP ports (if applicable).
● Login failure limits per IP address, with login blocking from the IP address when the limit is exceeded.
● Configurable session auto time out, and more than one simultaneous sessions.
● Limited IP address range for clients connecting to CMC.
● Secure Shell (SSH), which uses an encrypted layer for higher security.
● Single Sign-on, Two-Factor Authentication, and Public Key Authentication.
● CMC Signed Image — Used to protect the firmware image from undetected modification using digital signature.
Chassis overview
A Back Panel view of the chassis is given here with a table that lists the parts and devices available in the CMC.
Figure 1. Chassis back panel
Table 1. Chassis back panel — components
Item Indicator, Button, or Connector
1
Serial connector
2
Ethernet connector Gb1
3
Ethernet connector STK/Gb2 (stack)
4
System identification button
5
Low-profile PCIe expansion slots
6
Power supply (PSU1)
7
Power supply (PSU2)
8
I/O module (2)
9
I/O module ports
10
I/O module indicators
A Front Panel view of the chassis is given here with a table that lists the parts and devices available in the CMC.
Overview
13