CLI Guide

The following example is for a system with multi-slot servers.
racadm getdcinfo
Group A I/O Type : Gigabit Ethernet
Group B I/O Type : PCIe
Group C I/O Type : PCIe
<
IO#> <Type> <State> <Role>
switch-1 Gigabit Ethernet OK Master
<Server#> <Presence> <DC1 Type> <DC1 State> <DC2 Type> <DC2 State>
server-1 Present PCIe OK PCIe OK
server-2 Not Present None N/A None N/A
server-3 Present PCIe OK None N/A
server-4 Not Present None N/A None N/A
getdcinfo -n
<Server#> <Presence> <DC1 Model Name> <DC2 Model Name>
server-1 Present None None
server-2 Not Present None None
server-3 Not Present None None
server-4 Present None Broadcom M5708t
getsleduplinkstatus
Description
Displays multi-node sled network switch uplink status.
Synopsis
racadm getsleduplinkstatus
Examples
racadm getsleduplinkstatus
Sled No : 2
Port No = 3
A1 Link Status = Up
A2 Link Status = Down
Port No = 4
A1 Link Status = Up
A2 Link Status = Up
Sled No : 3
Port No = 5
A1 Link Status = Up
A2 Link Status = Down
Port No = 4
A1 Link Status = Up
A2 Link Status = Up
RACADM Subcommand Details 35