CLI Guide

Input

• -m < module > — Species the module whose MAC address you want to view.

< module > may be one of the following:

server-n , where n=1–4

switch-n , where n=1–2

• -t — Displays the iSCSI MAC addresses for all servers or the specied server if used with -m

option.

• -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and

must be used with -m option.

• -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine

cards. When FlexAddress is enabled for a particular slot, then the chassis-assigned MAC/WWN

address is displayed.

• -c— Displays the Ethernet, iSCSI, MAC/WWN, assignment type, and partition status of all LOMs

or mezzanine cards. Valid values for -c option are:

• IO-Identity — Displays the user-dened MAC/WWN addresses.

• FlexAddress — Displays the chassis assigned WWN/MAC addresses.

• Factory — Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

• all — Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

Example

• Displays the NDC or LOM MAC address.

racadm getmacaddress

• Display iSCSI MAC addresses for all servers.

racadm getmacaddress -t iscsi

• Display iSCSI MAC for server-1.

racadm getmacaddress -m server-1 -t iscsi

• Display extra iSCSI MACs for server-1 (if available).

racadm getmacaddress -m server-1 -t iscsi -x

• Displays the user-dened MAC and WWN address.

• racadm getmacaddress -c io-identity

• racadm getmacaddress -c io-identity -m server -2

• Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

racadm getmacaddress -c all

• Displays the chassis assigned WWN/MAC address.

racadm getmacaddress -c flexaddress

• Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

racadm getmacaddress -c factory

Displays the MAC address for chassis.

racadm getmacaddress -m chassis

CMC Present N/A 74:86:7A:D5:33:44 N/A

Displays the MAC address for switch –1

racadm getmacaddress -m switch-1

RACADM Subcommand Details