CLI Guide
• (none) — Displays the version information for all targets or devices.
<Server> <iDRAC Version> <Blade Type>
<Gen> <Updatable>
server-1a 2.15.15.15 (18) PowerEdge FC430
iDRAC8 Y
server-1b 2.40.40.40 (13) PowerEdge FC430
iDRAC8 Y
server-1c 2.10.10.10 (49) PowerEdge FC430
iDRAC8 Y
server-1d 2.40.40.40 (13) PowerEdge FC430
iDRAC8 Y
server-3a 2.10.10.10 (27) PowerEdge FC430
iDRAC8 Y
server-3b 2.10.10.10 (49) PowerEdge FC430
iDRAC8 Y
server-3c 2.30.30.30 (10) PowerEdge FC430
iDRAC8 Y
server-3d 2.10.10.10 (49) PowerEdge FC430
iDRAC8 Y
<Switch> <Model Name> <HW Version>
<FW Version>
switch-1 1GBE PASS-THROUGH MODULE A00 N/A
<CMC> <CMC
Version> <Updatable>
cmc
2.00.000.20161003sahu Y
<Chassis Infrastructure> <FW Version> <FQDD>
Main Board 1.20.A00.201502058
System.Chassis.
1#Infra
structure.1
• -b — Displays the server's current BIOS version (default is iDRAC version).
• -c — Displays the server's current CPLD version.
• -l — Displays the rmware versions Lifecycle Controller components.
• -f < lter > — Filters the components. Must be used with -1 and be one of the following values:
• bios: BIOS
• idrac: iDRAC
• usc: Unied Server Congurator (Lifecycle Controller)
• diag: 32-bit Diagnostics
• drivers: OS Driver Package
• nic-x: Network Interface card. See -l output for possible values of x.
• -m < module > — Species the module or device for which you must retrieve the version
information.
< module > is one of the following:
• server-n , where n = 1 to 4.
• switch-n , where n = 1 to 2.
• CMC
• mainboard
Example
• Retrieve the version for a server 4
racadm getversion -m server-4
• Retrieve the Lifecycle Controller component versions for servers 1 and 3:
racadm getversion -l -m server-1 -m server-3
• Retrieve the Lifecycle Controller BIOS versions for servers 1 and 3:
racadm getversion -l -m server-1 -m server-3 -f bios
• Retrieve the version for all modules:
racadm getversion
RACADM Subcommand Details 59