Quick Reference Guide

20 RACADM Subcommands
Example
• racadm chassisaction -m switch-3 reset
Module power operation successful.
clrraclog
NOTE: To use this subcommand, you must have Clear Logs Administrator privilege.
Description
Removes all existing records from the CMC log. A new log entry is added to
record the date and time when the log was cleared, and the user who cleared
the log.
NOTE: To view the CMC log, use getraclog. For information about the CMC log, see
the "Viewing the CMC Log" section of the CMC User’s Guide.
Usage
racadm clrraclog
NOTE: The -A option is ignored and is supported to provide backward compatibility
for existing scripts.
Output
The CMC log was cleared successfully.
<action> Specifies the action you want to execute on the specified module.
<action> may be one of the following:
• powerdown — (Chassis only) Powers down the chassis.
•
powerup — (Chassis only) Powers up the chassis.
•
powercycle — Power cycles the module.
•
nongraceshutdown — (Chassis only) Shutdown the chassis
non-gracefully.
•
reset — Performs a hard reset of the module.
Table 2-1. chassisaction Subcommand Options (continued)
Option
Description