Quick Reference Guide

RACADM Subcommands 65

DNS CMC Name = cmc-51186

Current DNS Domain =

• racadm getsysinfo -A

"CMC Information:"

"Tue, 01 May 2007 02:33:47 AM

"1.3 (Build 06.12)" "" "Thu, 01 May 2007 02:12:43" "15"

"143.166.152.39" "143.166.152.1" "255.255.255.0" "1"

"00:11:43:FD:B4:39" "0.0.0.0" "0.0.0.0" "0" "1" "cmc-51186" ""

gettracelog

NOTE: This command is for Dell internal use only.

NOTE: To use this subcommand, you must have CMC Login User privilege.

Description

Displays the diagnostic trace log for the CMC. The default output display

shows the record number, timestamp, source, and description. The

timestamp begins at midnight, January 1 and increases until the system

boots. During system boot, the timestamp displays as <system boot>.

After the system boots, the system’s timestamp is used.

Usage

racadm gettracelog [-i]

racadm gettracelog [-s <

start record

>] [-c <

count

[-m]

Options

Table 2-25 describes the gettracelog subcommand options.

Table 2-25. gettracelog Subcommand Options

Option Description

(none) Displays the CMC trace log.

-s

Specifies the starting record to display.

-c

Specifies the number of records to display.

-i

Displays the number of entries in the CMC trace log.