Quick Reference Guide

RACADM Subcommands 89
NOTE: The -f option is supported from the remote RACADM interface only, and not
from serial/telnet/SSH console.
NOTE: If no options are specified, a CSR is generated and downloaded to the local
file system as sslcsr by default.
Restrictions
The sslcsrgen subcommand can only be executed from a local client and
cannot be used in the serial, Telnet, or SSH interface.
Example
• racadm sslcsrgen -s
CSR generation in progress.
• racadm sslcsrgen -g -f c:\csr\csrtest.txt
The csr was generated successfully.
sslresetcfg
NOTE: To use this subcommand, you must have Chassis Configuration
Administrator privilege.
Description
Regenerates the self-signed certificate used by the CMC Web GUI. The
certificate takes effect 30 seconds after the command is entered.
Usage
racadm sslresetcfg
Example
• racadm sslresetcfg
-f <filename> Specifies the filename where the CSR will be downloaded. Can
only be used with the -g option.
Table 2-40. sslcsrgen Subcommand Options
Option Description