User's Manual

100 Using the CMC Web Interface
Table 5-4. Individual Server Status - iDRAC Network Settings
Item Description
iDRAC MAC
Address
Displays server's management network interface (iDRAC) MAC
address, which is a unique identifier for the server on the network.
LAN Enabled Indicates if the LAN channel is Enabled (Yes) or disabled (No).
IPMI over LAN
Enabled
Indicates if the IPMI LAN channel is Enabled (Ye s) or disabled
(No).
DHCP Enabled Indicates whether Dynamic Host Configuration Protocol (DHCP)
is enabled (Yes) or disabled (No).
If this option is enabled (Yes), the server retrieves IP configuration
(IP address, subnet mask, and gateway) automatically from a
DHCP server on your network. The server will always have a unique
IP Address allotted over your network.
IP Address Specifies the IP address for the iDRAC network interface.
Subnet Mask Specifies the subnet mask for the iDRAC network interface.
Gateway Specifies the gateway for the iDRAC network interface.
Table 5-5. Individual Server Status - WWN/MAC Address
Item Description
Slot Displays the slot(s) occupied by the server on the chassis.
Location Displays the location occupied by the Input/Output modules. The
six locations are identified by a combination of the group name (A,
B, or C) and slot number (1 or 2). Location names are: A1, A2, B1,
B2, C1, or C2.
Fabric Displays the type of the I/O fabric.
Server-Assigned Displays the server-assigned WWN/MAC addresses embedded in
the controller's hardware. WWN/MAC addresses showing N/A
indicate that an interface for the specified fabric is not installed.