User's Manual

142 Using the CMC Web Interface
Table 5-22. Web Server Settings
Setting Description
Enabled Enables Web Server services (access through remote
RACADM and the Web interface) for the CMC.
Default: Checked (enabled)
Max Sessions Indicates the maximum number of simultaneous Web user
interface sessions allowed for the chassis. A change to the
Max Sessions property takes effect at the next login; it does
not affect current Active Sessions (including your own).
The remote RACADM is not affected by the Max Sessions
property for the Web Server.
Allowed range: 1–4
Default: 4
NOTE: If you change the Max Sessions property to a value
less than the current number of Active Sessions and then log
out, you cannot log back in until the other sessions have been
terminated or expired.
Idle Timeout Indicates the number of seconds before an idle Web user
interface session is automatically disconnected. A change to
the Timeout setting takes effect at the next login; it does
not affect the current session.
Timeout range: 60 to 10800 seconds.
Default: 1800 seconds