User's Manual

166 Using the CMC Web Interface
Health OK Indicates that FlexAddress is present
and providing status to the CMC. In
the event of a communication failure
between the CMC and FlexAddress, the
CMC cannot obtain or display health
status for FlexAddress.
Informational Displays information about FlexAddress
when no change in health status (OK,
Warning, Severe) has occurred.
Warning Indicates that only warning alerts have
been issued, and corrective action must
be taken within the time frame set by
the administrator. If corrective actions
are not taken within the administrator-
specified time, critical or severe failures
that can affect the integrity of the server
could occur.
Severe Indicates at least one Failure alert has
been issued. Severe status represents a
system failure on the server, and
corrective action must be taken
immediately.
No Value When FlexAddress is absent, health
information is not provided.
iDRAC firmware Displays the iDRAC version currently installed on the server.
BIOS Version Displays the current BIOS version of the server module.
Slot Slot number of the server associated with the fabric location.
Location Displays the location of the Input/Output (I/O) module in the
chassis by group number (A, B, or C) and slot number (1 or 2).
Slot names: A1, A2, B1, B2, C1, or C2.
Fabric Displays the type of fabric.
Server-Assigned Displays the server-assigned WWN/MAC addresses that are
embedded in the controller's hardware.
Chassis-Assigned Displays the chassis-assigned WWN/MAC addresses that are
used for the particular slot.