User's Manual

184 Using FlexAddress
FlexAddress feature
not active on the
chassis for any
reason (No SD card
inserted/ corrupt SD
card/ after feature
deactivated /SD card
bound to a different
chassis)
$racadm setflexaddr [-f
<fabricName>
<slotState>] OR
$racadm setflexaddr [-i
<slot#> <slotState>]
ERROR: Flexaddress
feature is not
active on the
chassis
Guest user attempts
to set FlexAddress
on slots/fabrics
$racadm setflexaddr [-f
<fabricName>
<slotState>]
$racadm setflexaddr [-i
<slot#> <slotState>]
ERROR: Insufficient
user privileges to
perform operation
Deactivating
FlexAddress feature
with chassis powered
ON
$racadm feature -d
-c flexaddress
ERROR: Unable to
deactivate the
feature because the
chassis is powered
ON
Guest user tries to
deactivate the
feature on the
chassis
$racadm feature -d
-c flexaddress
ERROR: Insufficient
user privileges to
perform operation
Changing the
slot/fabric
FlexAddress settings
while the server
modules are powered
ON
$racadm setflexaddr -i
1 1
ERROR: Unable to
perform the set
operation because
it affects a
powered ON server
Table 6-2. FlexAddress Commands and Output (continued)
Situation Command Output