User's Manual

240 Power Management
Viewing Power Budget Status
The CMC provides power status overviews of the power subsystem on the
Power Budget Status page.
Using the Web Interface
NOTE: To perform power management actions, you must have Chassis Control
Administrator privilege.
1 Log in to the CMC Web interface.
2 Select Chassis in the system tree.
3 Click the Power Management tab. The Power Budget Status page
displays.
Table 8-11 through Table 8-14 describe the information displayed on the
Power Budget Status page.
See "Configuring Power Budget and Redundancy" on page 245 for
information about configuring the settings for this information.
Table 8-10. Server Modules
Item Description
Slot Displays the location of the server module. The Slot is a sequential
number (1–16) that identifies the server module by its location
within the chassis.
Name Displays the server name. The server name can be redefined by the
user.
Present Displays whether the server is present in the slot (Yes or No). If this
field displays Extension of # (where the # will be 1-8), then
number that follows it is the main slot of a multi-slot server.
Actual (AC) Real-time measurement of the actual power consumption of the
server. The measurement is displayed in watts AC.
Cumulative
Power Start
Time
Real-time measurement of the cumulative power that the server
has consumed since the time displayed in the Start Time field. The
measurement is presented in KiloWatt Hour (kWh) units.
Peak
Consumption
Time Stamp
Displays the peak power that the server consumed at one time.
The time when the peak power consumption occurred is recorded
in the Time Stamp field.The measurement is displayed in watts.