User's Manual

Using the iKVM Module 263
To access the Flag dialog box:
1
Press <Print Screen>. The Main dialog box appears.
2 Click Setup and then Flag . The Flag dialog box appears.
To specify how the status flag displays:
1
Select Displayed to show the flag all the time or Displayed and Timed to
display the flag for only five seconds after switching.
NOTE: If you select Timed by itself, the flag is not displayed.
2 Select a flag color from the Display Color section. Options are black, red,
blue, and purple.
3 In Display Mode , select Opaque for a solid color flag or Transparent to see
the desktop through the flag.
4 To position the status flag on the desktop:
a Click Set Position. The Set Position Flag displays.
b Left-click on the title bar and drag it to the desired location on the
desktop.
c Right-click to return to the Flag dialog box.
NOTE: Changes made to the flag position are not saved until you click OK in the
Flag dialog box.
5 Click OK to save settings.
To exit without saving changes, click .
Managing Servers With iKVM
The iKVM is an analog switch matrix supporting up to 16 servers. The iKVM
switch uses the OSCAR user interface to select and configure your servers. In
addition, the iKVM includes a system input to establish a CMC command
line console connection to the CMC.
Peripherals Compatibility and Support
The iKVM is compatible with the following peripherals:
• Standard PC USB keyboards with QWERTY, QWERTZ, AZERTY, and
Japanese 109 layouts.
• VGA monitors with DDC support.