User's Manual
296 I/O Fabric Management
• The CMC can read the IP address setting too quickly after a configuration
change; it will display
0.0.0.0
after clicking
Apply.
You must hit the refresh
button in order to see if the IP address is set correctly on the switch.
• If an error is made in setting the IP/mask/gateway, the switch will not set
the IP address and will return a
0.0.0.0
in all fields. Common errors are:
• Setting the out-of-band IP address to be the same as, or on the same
network as, the in-band management IP address.
• Entering an invalid subnet mask.
• Setting the default gateway to an address that is not on a network that
is directly connected to the switch.
For more information on IOM network settings, refer to the Dell™
PowerConnect™ M6220 Switch Important Information document and the
Dell™ PowerConnect™ 6220 Series Port Aggregator White Paper.