User's Manual

Troubleshooting and Recovery 299
You can add and configure SNMP alerts using the Web interface or
RACADM.
Table 11-1. Chassis Events That Can Generate SNMP and E-mail Alerts
Event Description
Fan Probe Failure A fan is running too slow or not at all.
Battery Probe Warning A battery has stopped functioning.
Temperature Probe
Warning
The temperature is approaching excessively high or low
limits.
Temperature Probe Failure The temperature is either too high or too low for proper
operation.
Redundancy Degraded Redundancy for the fans and/or power supplies has been
reduced.
Redundancy Lost No redundancy remains for the fans and/or power
supplies.
Power Supply Warning The power supply is approaching a failure condition.
Power Supply Failure The power supply has failed.
Power Supply Absent An expected power supply is not present.
Hardware Log Failure The hardware log is not functioning.
Hardware Log Warning The hardware log is almost full.
Server Absent An expected server is not present.
Server Failure The server is not functioning.
KVM Absent An expected KVM is not present.
KVM Failure The KVM is not functioning.
IOM Absent An expected IOM is not present.
IOM Failure The IOM is not functioning.
Firmware Version Mismatch There is a firmware mismatch for the chassis or server
firmware.
Chassis Power Threshold
Error
Power consumption within the chassis reached the
System Input Power Cap.