Manualshelf

User's Manual

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 2.0
331332333334335336337338339340
332 Troubleshooting and Recovery
Figure 11-1. Password Reset Jumper Location
3
Slide the CMC module into the enclosure. Reattach any cables that were
disconnected.
4
Initiate a changeover to make the module active using the GUI interface
to perform the following steps:
a
Navigate to the
Chassis
page, click the
Power Management
tab -
Control
sub tab.
b
Select the
Reset CMC (warm boot)
button.
c
Click
Apply
.
Table 11-15. CMC Password Jumper Settings
PASSWORD_RSET (default) The password reset feature is disabled.
The password reset feature is enabled.
PASSWORD_RSET