User's Manual

Using the CMC Web Interface 87

Using the CMC Web Interface

The CMC provides a Web interface that enables you to configure the CMC

properties and users, perform remote management tasks, and troubleshoot a

remote (managed) system for problems. For everyday chassis management,

use the CMC Web interface. This chapter provides information about how to

perform common chassis management tasks using the CMC Web interface.

You can also perform all configuration tasks using local RACADM commands

or command line consoles (serial console, Telnet, or SSH). For more

information about using local RACADM, see "Using the RACADM

Command Line Interface" on page 63. For information on using command

line consoles, see "Configuring CMC to Use Command Line Consoles" on

page 49.

NOTE: If you are using Microsoft

Internet Explorer

, connecting through a proxy,

and see the error "The XML page cannot be displayed," you will need to disable the

proxy to continue.

Accessing the CMC Web Interface

To access the CMC Web interface:

Open a supported Web browser window.

For more information, see "Supported Web Browsers" on page 22.

Type the following URL in the

Address

field, and then press <Enter>:

https://<CMC

IP address>

If the default HTTPS port number (port 443) has been changed, type:

https://<CMC

IP address>

port number

where

<IP address

> is the IP address for the CMC and

port

number

is the HTTPS port number.

The CMC

page appears.