CLI Guide

Group Key Attribute
cfgStandardSchema cfgSSADRoleGroupName
cfgTraps cfgTrapsAlertDestIPAddr
cfgUserAdmin cfgUserAdminUserName
• Displays a list of the available conguration groups on CMC in an alphabetical order.
racadm getconfig -h
• Displays the conguration properties for the user named root.
racadm getconfig -u root
• Displays the user group instance at index 2 with verbose information for the property values.
racadm getconfig -g cfgUserAdmin -i 2 -v
• Displays the storage sled information.
racadm getconfig —g cfgStoragemodule —m storage-3
getdcinfo
Table 27. Details of getdcinfo
Description Displays general I/O module and daughter card conguration information. Only the CMC controls
daughter cards.
To use this subcommand, you must have the CMC Login User privilege.
NOTE: Fabric verication for server DCs is performed only when the chassis is turned on.
When the chassis is on stand-by power, iDRACs on the server modules remain turned o
and thus are unable to report the server's DC fabric type. The DC fabric type may not be
reported in the CMC user interface until iDRAC on the server is turned on.
Synopsis
racadm getdcinfo
Input -n — Displays the model names for the daughter cards in servers.
Table 28. Example
<IO#> <Type> <State> <Role>
switch-1 Gigabit Ethernet OK Master
Table 29. Server- state
<Server#> <Presence> <DC1 Type> <DC1 State> <DC2 Type> <DC2 State>
server-1 Present PCIe OK PCIe OK
server-2 Not Present None N/A None N/A
server-3 Present PCIe OK None N/A
server-4 Not Present None N/A None N/A
36 RACADM Subcommand Details