CLI Guide

Message = PSU redundancy policy changed.
--------------------------------------------------------------------------------
SeqNumber = 4
Message ID = USR8513
Category = Audit
AgentID = CMC
Severity = Information
Timestamp = 2016-07-04 20:23:46
Message Arg 1 = root
Message Arg 2 = 10.94.18.232
Message Arg 3 = GUI
Message = root login successful from 10.94.18.232 (type=GUI).
--------------------------------------------------------------------------------
SeqNumber = 3
Message ID = USR8501
Category = Audit
AgentID = CMC
Severity = Information
Timestamp = 2016-07-04 20:22:06
Message Arg 1 = 7990
Message Arg 2 = 41269
Message = Successfully closed Session process: pid=7990 sid=41269
--------------------------------------------------------------------------------
SeqNumber = 2
Message ID = USR8501
Category = Audit
AgentID = CMC
Severity = Information
Timestamp = 2016-07-04 20:22:06
Message Arg 1 = 7990
Message Arg 2 = 48120
Message = Successfully closed Session process: pid=7990 sid=48120
--------------------------------------------------------------------------------
===============================================================================
sel Information
===============================================================================
Mon Oct 03 2016 20:21:57 Normal Log cleared.
Mon Oct 03 2016 20:24:39 Normal The power supplies are not redundant.
racreset
Table 83. Details of racreset
Description Performs a CMC or a RAC reset operation.
NOTE: To use this subcommand, you must have the Chassis Administrator privilege.
NOTE: When you run a racreset subcommand, CMC may require up to two minutes to
return to a usable state.
Synopsis
racadm racreset [-m <module>]
Input -m<module> — This option can have one of the following values:
• server <-n>, where n= 1–4
• server <-nx>, where n=1–4 and x=a-d (lower case)
• sled-n , where n=1–4
NOTE: The -m sled-n option is available only for multinode servers.
NOTE: You can use the -f option to force the reset. This option is available only with the -
m option.
RACADM Subcommand Details 73