Reference Guide

disableperc

Description

Indicates the RAID configuration of hardware RAID connected to the system. This

subcommand disables the power to a RAID card.

NOTE:

• Using this subcommand will power cycle the chassis and set the fault-tolerant

system configuration to Single PERC mode.

Synopsis

racadm raid disableperc:<AdapterFQDD>

Example

racadm raid disableperc:RAID.ChassisIntegrated.2-1

remoteimage

Description Connects, disconnects, or deploys a media file on a remote server.

To use this subcommand, you must have the Administrator privilege.

Synopsis

racadm remoteimage <options>

Input

• -c - Connect the image.

• -d - Disconnect the image.

• -u - Username to access the network share.

• -p - Password to access the network share.

• -l - Image location on the network share; use double quotation marks

with a location.

• -s - Display current status; –a is assumed, if not specified.

Example

• racadm remoteimage -c -u "user" -p "pass" -l //shrloc/

foo.iso

Remote Image is now Configured

• racadm remoteimage -d - disconnect

Disable Remote File Started. Please check status using -s option to know

Remote File Share is ENABLED or DISABLED.

• racadm remoteimage -s - status

Remote File Share is Enabled

UserName

Password

ShareName //192.168.0.1/xxxx/dtk_3.3_73_Linux.iso

serveraction

Description Enables you to perform power management operations on the host system.