CLI Guide
Example
$ racadm getconfig -g cfgIPv6LanNetworking
cfgCurrentIPv6Enabled=1
cfgIPv6AutoConfig=1
cfgIPv6Address=::
cfgIPv6PrefixLength=64
cfgIPv6Gateway=::
cfgIPv6DNSServersFromDHCP6=1
cfgIPv6DNSServer1=::
cfgIPv6DNSServer2=::
If both IPv4 and IPv6 are enabled on the CMC, IPv6 DNS servers take priority. The order of preference for DNS servers is:
• cfgIPv6DNSServer1
• cfgIPv6DNSServer2
• cfgDNSServer1
• cfgDNSServer2
cfgCurrentLanNetworking (Read Only)
This group displays the current CMC NIC properties.
Use this object with the getcong subcommand.
To use this object property, you must have the CMC Login User privilege.
Synopsis
racadm getconfig -g cfgCurrentLanNetworking
cfgNicCurrentIpAddress
Table 298. Details of cfgNicCurrentIpAddress
Description Displays the IP address the CMC is currently using.
Legal Values Valid IPv4 addresses. For example: 192.168.0.20.
cfgNicCurrentNetmask
Table 299. Details of cfgNicCurrentNetmask
Description Displays the subnet mask the CMC is currently using.
Legal Values Valid IPv4 addresses. For example: 192.168.0.20.
154 CMC Property Database Group and Object Descriptions