CLI Guide

• Display eventlter congurations for a specic subcategory. For example, licensing under the audit
category:
racadm eventfilters get -c cmc.alert.audit.lic
• Display eventlter congurations for a specic severity. For example, warning under the audit
category:
racadm eventfilters get -c cmc.alert.audit.warning
• Display eventlter congurations for a specic severity and subcategory. For example, a severity
of warning in the subcategory licensing under audit category:
racadm eventfilters get -c cmc.alert.audit.lic.warning
• Clear all available alert settings: racra
racadm eventfilters set -c cmc.alert.all -n none
• Congure using subcategory as a parameter. For example, all congurations under the licensing
subcategory in the audit category are assigned powero as action and all notications are enabled:
racadm eventfilters set -c cmc.alert.audit.lic -n all
• Congure using subcategory and severity as parameters. For example, all Information events
under the licensing subcategory in the audit category are assigned powero as action and all
notications are disabled:
racadm eventfilters set -c cmc.alert.audit.lic.info -n none
fanoset
Table 16. Details of fanoset
Description
Congures the internal fans to run at a higher speed than the normal speed.
To use this subcommand, you must have the Chassis Conguration Administrator privilege.
Synopsis
racadm fanoffset [-s <off|low|medium|high>
Valid category values are:
• o
• low
• medium
• high
Input s — Sets the fan speed.
Example
• Disable the fanoset feature.
racadm fanoffset -s off
• Increases fan speed by 20% of fan’s maximum speed. Minimum speed for fan is 35% of the
maximum.
racadm fanoffset -s low
• Increases fan speed by 50% of fan’s maximum speed. Minimum speed for fan is 65% of the
maximum.
racadm fanoffset -s medium
• Sets fans to run at 100% of fan’s maximum speed.
racadm fanoffset -s high
28 RACADM Subcommand Details