CLI Guide
feature
Table 17. Details of feature
Description Displays all active chassis features. The information displayed includes feature name, date activated,
and the serial number of the SD card used to activate the feature.
Dell Feature Cards may contain more than one feature
NOTE: To use this subcommand to deactivate the FlexAddress or ExtendedStorage, you
must have the Chassis Conguration Administrator privilege. A user with login privileges
can view status only.
NOTE: To deactivate FlexAddress features, the chassis must be turned
o.
Synopsis
• racadm feature -s
• racadm feature -d -c <featurename>
• racadm feature -r -c ExtendedStorage
Input
• -s — Displays the status of active features.
• -d — Deactivates the feature specified in -c option.
NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating one of
them results in deactivation of the other feature also. However, ExtendedStorage is not
aected by the deactivation of FlexAddress or FlexAddresPlus.
• -r — Repair damaged/unformatted ExtendedStorage media.
NOTE: The –r switch requires that the ExtendedStorage feature be deactivated.
CAUTION: Using the -r switch reformats the SD media in the CMC card slot. Any existing
ExtendedStorage data will be lost.
• -c — <featurename> must be one of the following:
• flexaddress (with -d)
• flexaddressplus (with -d) ExtendedStorage (with -d or -r)
featurecard
Table 18. Details of featurecard
Description Veries proper SD card installation and displays the SD card status.
To use this subcommand, you must have the Chassis Conguration Administrator privilege.
Synopsis
racadm featurecard -s
Input -s — Lists active SD card features and SD card status.
Output
An example of output is given here.
racadm featurecard -s
RACADM Subcommand Details 29