CLI Guide

• Cancel a rmware update in progress:
racadm fwupdate -c
• Signed CMC Firmware Image:
racadm fwupdate –g –u –a <TFTP IP> -d <Firmware Path> -m
Firmware update has been initiated. This update process may take Several
minutes to complete.
racadm fwupdate –s –m cmc-active
Invalid firmware: The uploaded firmware image does not contain A
verification signature.
Table 20. Firmware update methods
FW Update Method CMC
Local RACADM
No
Local RACADM—TFTP
No
Local RACADM—FTP
No
Remote RACADM
Yes
Remote RACADM—TFTP
Yes
Remote RACADM—FTP
Yes
Firmware RACADM—TFTP
Yes
Firmware RACADM—FTP
Yes
get
Table 21. Details of get
Description
Saves CMC conguration properties or CMC Event Filter congurations to a le.
NOTE: If CMC is not in the network, you cannot export the chassis conguration prole to a
remote network share with proxy using the get command. But, you can export the chassis
conguration prole to the local management station.
Synopsis
racadm get -f <filename>
racadm -r <CMC IP> -u <username> -p <password> get -f <filename>
racadm -r <CMC IP> -u <username> -p <password> get -f <filename> -t xml
racadm get -f <filename> -t xml -u <username> -p <password> -l <CIFS
share>
racadm get -f <filename> -t xml -l <NFS share>
Input
• –f: save event lter congurations to a le.
• -u: username of the remote share where the le must be exported.
32 RACADM Subcommand Details