CLI Guide

• -p: password for the remote share where the le must be exported.
• -l: network share location where the le must be exported.
• -t: specify the le type that has to be exported. Valid value is “XML”.
• --clone: export the cloned conguration le. Only the XML le format is supported. The
conguration le can be exported to a local or remote share.
• --replace: export the replaced conguration le. Only XML le format is supported. The
conguration le can be exported to a local or remote share.
• --includeph: include password hash attributes
Example
• Export event lter congurations to a le by using remote racadm.
racadm -r 192.168.0.120 -u abc -p <password> get -f file.txt
• Export the CMC XML conguration to a local share using remote racadm
racadm -r 192.168.0.120 -u abc -p <password> get -f file.xml -t xml
• Export the CMC XML conguration to a CIFS share
racadm get -f file.xml -t xml -u myuser -p mypass -l //192.168.0.0/
share
• Export the CMC XML conguration to an NFS share
racadm get -f file.xml -t xml -l 192.168.0.0:/myshare
getactiveerrors
Table 22. Details of getactiveerrors
Description
Displays the active errors in a chassis.
To run this subcommand, you must have the CMC Login User privilege.
Synopsis
racadm getactiveerrors [-s <severity> ] [-m <module>]
Input
valid values for <severity>: critical, warning, info
valid values for <module>: server-n, where n = 1 to 4
switch-n, where n = 1 to 2
cmc-n, where n = 1
fan-n, where n = 1 to 8
ps-n, where n = 1 or 2
chassis
Output
Display entire log:
racadm getactiveerrors
- Display specic module log:
racadm getactiveerrors -m server-1
- Display entire informational log:
racadm getactiveerrors -s info
RACADM Subcommand Details 33