CLI Guide
NOTE: If FlexAddress is not activated on the chassis, the command displays server-
assigned MAC/WWN addresses. If the slot is empty, the command leaves the server-
assigned MAC/WWN addresses blank. If an external console controls the MAC/WWN
addresses, the command displays an externally managed message.
Synopsis
racadm getflexaddr [-i <slotNum>]
Input -i < slotNum > — Species the slot information to be displayed. < slotNum > must be from 1 to 4.
Table 33. Example
<Slot#> <Status> <Server Presence>
1a Enabled Present
1b Enabled Present
1c Enabled Present
1d Enabled Not Present
2 Enabled Present
3a Disabled Present
3b Disabled Present
3c Disabled Present
3d Disabled Present
4 Disabled Present
Table 34. Details
<Fabric
>
<Type> <Server-Assigned> <Chassis-Assigned>
slot1a-
idrac
Controller 18:A9:9B:FD:C3:FF
F0:1F:AF:88:21:A0(active)
slot1-
A1
10 GbE
KR
00:90:FA:51:31:E2
F0:1F:AF:88:21:A1(active)
10 GbE KR/
3
00:90:FA:
51:31:E3
F0:1F:AF:88:21:A3(active)
FCoE-WWN 10:00:00:90:FA:51:31:E3) 20:01:F0:1F:AF:88:21:A3(active)
10 GbE KR/
3
00:90:FA:
51:31:E5
F0:1F:AF:88:22:75(active)
FCoE-
WWN
10:00:00:90:FA:51:31:E5 20:01:F0:1F:AF:88:22:75(active)
10 GbE
KR
00:90:FA:
51:31:E5
20:01:F0:1F:AF:88:22:73(active)
38 RACADM Subcommand Details