CLI Guide

NOTE: 10 GbE KR/3 — The value 3 indicates the protocol type.
getioinfo
Table 35. Details of getioinfo
Description Displays general information about the stack and I/O modules on the chassis.
To use this subcommand, you must have the CMC Login User privilege.
NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fiber
Channel, and Inniband.
Synopsis
racadm getioinfo [-m <module>] [-s]
Input
• -m — Species the module or device. The <module> must be switch — <n>, where n = 1–2
• -s — Displays the stack information.
•
Table 36. Example 1
<IO> <Name> <Type> <Presence
>
<POST> <Power> <Role> <Secure
Mode>
<Mode>
switch-1 N/A None Not
Present
N/A N/A N/A No N/A
switch-2 PE 10
Gigabit
KR
Present OK ON Master No N/A
•
Table 37.
Example 2
<IO> <Name> <Type>
<Presenc
e> <POST> <Power> <Role>
<SecureM
ode> <Mode>
Switch-
1
1GBE PASS-
THROUGH MODULE
Gigabit
Ethernet
Present OK ON Master No N/A
getled
Table 38. Details of getled
Description Displays the LED settings on a module: blinking, not blinking, or unknown (for empty slots).
To use this subcommand, you must have the Login User privilege.
Synopsis
racadm getled -m <module>
Input CMC only options:
-m < module > — Species the module whose LED settings you want to view.
< module > can be one of the following values:
• server-<n> where n=1-4
40 RACADM Subcommand Details