CLI Guide

getniccfg
Table 52. Details of getniccfg
Description Displays the current NIC settings.
Synopsis
racadm getniccfg
Input
racadm getniccfg
racadm getniccfg –m <module>
where –m must be one of the following values:
•
chassis
: default state if -m is not specied
•
server-n
: where n = 1 to 4
• switch-n
: where n = 1 or 2
Example
racadm getniccfg
NIC Enabled = 1
IPv4 Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 192.168.0.12
Current Subnet Mask = 255.255.254.0
Current Gateway = 192.168.0.1
IPv6 Enabled = 0
Autoconguration Enabled = 1
Static IPv6 Address = ::/64
Static IPv6 Gateway = ::
Link Local Address = ::
Current IPv6 Address 1 = ::
Current IPv6 Gateway = ::
Speed = Autonegotiate
Duplex = Autonegotiate
RACADM Subcommand Details
47