CLI Guide
VLAN Enable = 0
VLAN ID = 1
VLAN priority = 0
racadm getniccfg -m server-1
LOM Model Name = BRCM 10GbE 2P 57810s bNDC
LOM Fabric Type = 10 GbE KR
IPv4 Enabled = 1
DHCP Enabled = 1
IP Address = 192.168.0.18
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
IPv6 Enabled = 0
Autoconīguration Enabled = 0
Link local Address =
IPv6 Gateway = ::
VLAN Enable = 0
VLAN ID = 1
VLAN priority = 0
racadm getniccfg -m switch-1
DHCP Enabled = 1
IP Address = 192.168.0.12
Subnet Mask = 255.255.255.0
Gateway = 0.0.0.0
Output
The getniccfg subcommand displays an appropriate error message if the operation is not successful. Otherwise, the output is displayed in
the following format:
NIC Enabled = 1
IPv4 Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 10.94.225.212
Current Subnet Mask = 255.255.255.128
Current Gateway = 10.94.225.129
IPv6 Enabled = 0
Autoconfiguration Enabled = 1
Static IPv6 Address = ::/64
Static IPv6 Gateway = ::
Link Local Address = ::
Current IPv6 Address 1 = ::
48
RACADM Subcommand Details