CLI Guide

Display format when storage sleds are not installed on the CMC FX2 or CMC FX2s system.
racadm getstoragemoduleinfo
This command is not supported on this configuration.
getsvctag
Table 71. Details of getsvctag
Description Displays the Service Tag of the host system.
Synopsis
racadm getsvctag
Input
getsvctag
Output
<Module> <ServiceTag> <NodeId>
Chassis STPST02 N/A
Switch-1 0000000 N/A
Switch-2 N/A N/A
Server-1 FC830 FC830
Server-2 Extension(1) N/A
Storage-3 7647563 N/A
Storage-4 7654321 N/A
Example
racadm getsvctag
getsysinfo
Table 72. Details of getsysinfo
Description
Displays information related to CMC and chassis.
NOTE: The Hostname and OS Name elds in the getsysinfo output display accurate
information only if Dell OpenManage Server Administrator is installed on the managed
system. Else, these elds may be blank or inaccurate. An exception to this are VMware
operating system names, which are displayed even if Server Administrator is not installed
on the managed system.
Synopsis
racadm getsysinfo [-d] [-c] [-A] [-4] [-6]
Input
• -d - Displays CMC information.
• -c - Displays chassis information.
• -A - Does not display headers and labels.
• -4 - Displays IPv4 information.
• -6 - Displays IPv6 information.
Output
CMC Information:
CMC Date/Time = Tue Jan 29 2013 23:00
CMC Location = CMC-1
Primary CMC Location = 4.40
CMC Version = 1.10
Last Firmware Update = Mon Jan 28 2013 08:41
Hardware Version = A04
CMC Network Information:
RACADM Subcommand Details 59