CLI Guide

server-3c 2.30.30.30 (10) PowerEdge FC430

iDRAC8 Y

server-3d 2.10.10.10 (49) PowerEdge FC430

iDRAC8 Y

switch-1 1GBE PASS-THROUGH MODULE A00 N/A

<CMC> <CMC

Version> <Updatable>

cmc

2.00.000.20161003sahu Y

Main Board 1.20.A00.201502058

System.Chassis.

1#Infra

structure.1

• -b — Displays the server's current BIOS version (default is iDRAC version).

• -c — Displays the server's current CPLD version.

• -l — Displays the rmware versions Lifecycle Controller components.

• -f < lter > — Filters the components. Must be used with -1 and be one of the following values:

– bios: BIOS

– idrac: iDRAC

– usc: Unied Server Congurator (Lifecycle Controller)

– diag: 32-bit Diagnostics

– drivers: OS Driver Package

– nic-x: Network Interface card. See -l output for possible values of x.

• -m < module > — Species the module or device for which you must retrieve the version

information.

< module > is one of the following:

– server-n , where n = 1 to 4.

– switch-n , where n = 1 to 2.

– CMC

– mainboard

NOTE

: The Linux shell script does not support the characters—$ (dollar),` (back quote), \

(forward slash), & (ampersand), ( (open bracket), ) (Close bracket), = (equal), | (Pipe), ;

(semi colon)," (Double quote), ' (single quote), < (less than), and > (greater than).

Example

• Retrieve the version for a server 4

racadm getversion -m server-4

• Retrieve the Lifecycle Controller component versions for servers 1 and 3:

racadm getversion -l -m server-1 -m server-3

• Retrieve the Lifecycle Controller BIOS versions for servers 1 and 3:

racadm getversion -l -m server-1 -m server-3 -f bios

• Retrieve the version for all modules:

racadm getversion

• Retrieve the iDRAC version in all the servers that are attached to the chassis:

racadm getversion -f idrac

62 RACADM Subcommand Details