CLI Guide
ifcong
Table 75. Details of ifcong
Description Displays the contents of the network interface table.
To use this subcommand, you must have the Administrator privilege.
Synopsis
racadm ifconfig
Example
$ racadm ifconfig
eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23
inet addr:192.168.0.1 Bcast:192.168.0.120
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:2550665 errors:0 dropped:0 overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:1000
RX bytes:272532097 (259.9 MiB) TX bytes:0
(0.0 B)
jobqueue
Table 76. Details of jobqueue
Description Displays the jobs in that are currently being run, delete the jobs, and create a job.
NOTE: To view the jobs, you must have CMC Login User privilege.
NOTE: To delete the jobs, you must have Chassis Conguration Administrator
privilege.
Synopsis
• racadm jobqueue view
• racadm jobqueue delete
• racadm jobqueue create
Input
• —i — Species the JobID that is displayed or deleted.
• – –all — The JobIDs that are not applied are deleted.
• <fqdd> — Species an FQDD for which a job has to be created.
• reboot type — Species a reboot type. Valid options are none: No Reboot Job which is the
default.
• start time — Species a start time for job to be scheduled in yyyymmddhhmmss format. If you
specify TIME_NOW, the job is immediately run.
• Expiration time — Species the expiry time for the job to complete in yyyymmddhhmmss format.
If you specify TIME_NA, the wait-time is not applicable for the job.
RACADM Subcommand Details 63