CLI Guide
— ss is the second
— Setting the time using the -l and -z options is recommended. This command format allows the
CMC to fully support local time zones, including the ability to automatically adjust the CMC time
to the local Daylight Savings Time.
Example The setractime subcommand supports dates ranging from 1/1/1970 00:00:00 through 12/31/2030
23:59:59. To set the local time to October 24, 2007 at 3:02:30 PM:
racadm setractime -l 20071024150230
The time was set successfully.
setslotname
Table 94. Details of setslotname
Description
Sets the name of the slot and enables the feature to display the host name (if available) or iDRAC
DNS name of all the four slots, or of a specied slot (indicated by the slot number) in the chassis.
Optionally, use this command to set whether the slot name or host name is displayed in the CMC
web interface or with the getslotname -i <
slot Num
> command. If the host name is not available,
the static slot name is used.
To use this subcommand, you must have the Administrator privilege.
NOTE:
• The OMSA server agent must be present and running on the server to use the Display
Hostname feature. If the agent is not running, the setting is ignored. For more information,
see the Dell OpenManage Server Administrator User's Guide at support.dell.com/
manuals.
• The special characters " (double quote), ` (back quote), & (ampersand), \ (backslash), ;
(semicolon), ' (single quote), < (open angular bracket), and > (close angular bracket) are
not supported for this subcommand.
Synopsis
• racadm setslotname [-i<Slot_Number><Slot_Name_To_Be_Set> | -h 0|1|
2]
• racadm setslotname -h <value>
Input
• -i <Slot_Number>—Specify the slot number in the chassis. Valid values: 1-4.
• <Slot_Name_To_Be_Set> —The new name to be assigned to the slot.
• —h <values>—Displays the Hostname, Slotname, or iDRAC DNS name. The legal values are:
– 0—Displays the Slotname
– 1—Displays the Hostname
– 2—Displays the iDRAC DNS name
Example
• Set the name of slot 3 as server3:
racadm setslotname -i 3 server3
• Enable system to display host names (1=Hostname):
racadm setslotname -h 1
RACADM Subcommand Details 83