Release Notes

What is New

Release 2.20

• Changing the iDRAC DNS name from CMC.

• Enabling CLI prompt to display chassis name.

• Supporting two new COMMs cards Intel 10Gb NICs—Dell P/N C4D5P and 4V7G2

Release 2.10

• Supporting PowerEdge FD332 HBA330 storage solution on PowerEdge FX2s chassis.

• Updating the Linux kernel open source package to version 4.9.31.

• Enabling windows file sharing protocol version SMBv2 and SMBv3.

• Updating the OpenSSH open source package to version 7.6p1. The minimum key length required for SSH is 1024 bits.

• Supporting slot names with a length of 24 characters to identify individual servers.

• Enabling SNMP trap for the TMP8501 alert.

• Extending fabric flex address configuration support in chassis profile .xml file.

• Supporting 128-bit session identifiers.

• Federal Information Processing Standards (FIPS) 140-2 cryptography capability. The CMC 2.00 release is FIPS certified version

(Certification Number: #2861).

• Firmware and driver refresh of COMMs cards on Dell's 14th generation of PowerEdge servers.

Release 2.0

• Supporting PowerEdge FC640 sled on the PowerEdge FX2/FX2s chassis.

• Enabling Fault Tolerant Power Supply Redundancy control.

• Updating the physical mapping of TOR switch ports to Dell EMC's 14th generation server ports using LLDP open source package

version 0.7.7.

• Supporting X16 Gen 3 PCIe IDT retimer Mezz Card.

• Collecting CMC dumplogs as part of the server's SupportAssist tab.

• Integrating ZIP open source package version 3.0 for SupportAssist.

• Integrating LSOF open source package version 4.86 for SupportAssist.

• Monitoring CMC Fan sensors PWM using RACADM:

• getsensorinfo

• Integrating the event filter configurations on chassis profile XML file.

• Updating the OpenSSL open source package to version 1.0.2K.

• Updating the OpenSSH open source package to version 7.4p1.

• Updating enterprise OID in the SNMPv3 trap.

• Extending SNMP protocol and custom discovery port configuration in GUI.

• Extending SNMPv3 trap configuration support in WSMan.

• Configuring CMC using WSMan for the following SNMPv3 user attributes:

• userAdminSNMPv3Enable

• userAdminSNMPv3AuthenticationType

• userAdminSNMPv3PrivacyType

• Monitoring CMC using WSMan for the following sensors:

• Fan sensor speed

• Temperature sensor for chassis and servers

8 What is New