CLI Guide

cfgOobSnmp
This group contains parameters to configure the SNMP agent and trap capabilities of CMC. One instance of the group is allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2, and the Dell enterprise-specific MIB.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read/Write)
Table 158. Details of cfgOobSnmpAgentCommunity
Description Specifies the SNMP Community Name (identical to community string) used for SNMP traps. The
community string acts as a password shared between different hosts over the network. This
community string value must match with that of the other hosts for any kind of communication
through SNMP.
Legal Values A string of up to 31 characters.
Default public
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpAgentCommunity=public
cfgOobSnmpAgentEnable (Read/Write)
Table 159. Details of cfgOobSnmpAgentEnable
Description Enables or disables the SNMP agent.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
cfgOobSnmpProtocol
Table 160. Details of cfgOobSnmpProtocol attribute
Description
Specifies the SNMP protocol used for SNMP traps.
Legal Values
• 0 — All
• 1 — SNMPv3
Default
0
CMC Property Database Group and Object Descriptions 117