CLI Guide

cfgRacTuneChassisNameInPromptEnable
Table 190. Details of cfgRacTuneChassisNameInPromptEnable attribute
Description Enables or disables display of the chassis name in the SSH prompt.
Legal Values
• 0—Disable
• 1—Enable
Default 0
NOTE: You must have the chassis configuration administrator privilege to set and get the
cfgRacTuneChassisNameInPromptEnable attribute.
cfgServerInfo
For CMC, this group allows you to displays information for and configure a server in the chassis.
For iDRAC this group allows you to select the BIOS first boot device and provides the option to boot the selected device only once.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgServerInfo group.
cfgServerInfoIndex (Read Only)
Table 191. Details of cfgServerInfoIndex
Description Displays the index name of the server.
cfgServerSlotNumber (Read Only)
Table 192. Details of cfgServerSlotNumber
Description Specifies the location of the specified server (1–4) in the chassis.
cfgServerServiceTag (Read Only)
Table 193. Details of cfgServerServiceTag
Description Displays the service tag of the specified server.
cfgServerName (Read/Write)
Table 194. Details of cfgServerName
Description Displays the name of the specified server.
Legal Values Maximum of 15 non-extended ASCII characters, (ASCII codes 32–126). For more information, see
Guidelines to Quote Strings Containing Special Characters.
Default SLOT - <slot number>
126 CMC Property Database Group and Object Descriptions