CLI Guide

Table 21. Firmware update methods (continued)
FW Update Method CMC
Firmware RACADM—FTP
Yes
get
Table 22. Details of get
Description
Saves CMC configuration properties or CMC Event Filter configurations to a file.
NOTE: If CMC is not in the network, you cannot export the chassis configuration profile
to a remote network share with proxy using the get command. But, you can export the
chassis configuration profile to the local management station.
Synopsis
racadm -r <cmc ip> -u <cmc username> -p <cmc password> get -f
<filename>
racadm -r <cmc ip> -u <cmc username> -p <cmc password> get -f
<filename> -t xml
racadm get -f <filename> -t xml -u <username> -p <password> -l <CIFS
share>
racadm get -f <filename> -t xml -l <NFS share>
racadm get -f <filename> -t xml -u <username> -p <password> -l <CIFS
share> -m server-<n>
racadm get -f <filename> -t xml -l <NFS share> -m server-<n> [-d
<Profile_description>]
racadm get -f <filename> -t xml -l extended -m server-<n> [-d
<Profile_Description>]
racadm get -m server-<n> -s
racadm get list serverprofiles -l extended
racadm get list serverprofiles -m server-<n> --assign
racadm get -f <profile_file_name> -u <network_share_username> -p
<network_share_passwd> -l <CIFS Share> --export -t xml
racadm get -f <profile_file_name> -l <NFS Share> --export -t xml
Input
• list—lists stored or assigned profiles.
○ --assign—specify if the profile requested is a server profile assigned to a blade.
○ --export—copy profiles from Extended storage to network share.
• –f—save CMC or server configuration or CMC event filter configurations to a file.
• -u—username of the remote share where the file must be exported.
• -p—password for the remote share where the file must be exported.
• -l—network share location where the file must be exported. For more information about NFS or
CIFS share, see the section, Usage examples.
RACADM Subcommand Details 33