CLI Guide

Table 50. console assigned MAC/WWN of all LOMs or mezzanine cards (continued)

Switch-1 Not

Installed

Not

Present

Not Installed N/A N/A

NOTE: If the I/O Modules in slots 1 and 2 are absent and the getmacaddress -a and getmacaddress —c all

commands are run, the output is displayed as Not Installed in the following columns:

• <Presence>

• <NIC1 MAC Address>

• <NIC2 MAC Address>

getmodinfo

Table 51. Details of getmodinfo

Description

Displays configuration and status information for all modules or a specified module (server, storage sled, switch,

CMC, fan unit, blower, power supply unit, chassis, main-board, IO cable, and FPC cable) in the chassis.

To use this subcommand, you must have CMC Login User privilege.

NOTE: The Service Tag field is blank for modules that do not have Service Tags.

Synopsis

racadm getmodinfo [-m <module>] [-A]ra

Input

• -m < module > — Specifies the module for which the configuration and status information is required. The

default command (no options) displays information about all the major components in the chassis.

<module > can be one of the following values:

○ server-n , where n = 1 to 4

○ server-nx , where n = 1 to 4; x = a to d

○ switch-n , where n = 1 or 2

○ pcie-n , where n = 1 to 8

○ CMC-n , where n = 1

○ fan-n , where n = 1 to 8

○ ps-n , where n = 1 to 2

○ chassis

○ main-board

○ io-cable

○ fpc cable

• -A — Does not display the headers and labels in the output.

Example

Table 52. Details

<module> <presence

<pwrStat

Chassis

Present ON OK ST0MP19 N/A

Main-

Board

Present ON OK N/A N/A

RACADM Subcommand Details 49