Release Notes

• Issue 5:

Description

When CMC rmware is downgraded to 1.36 from 2.00 or later while network share is congured, the Server Components Update page

gets corrupted.

Resolution

Clear the network conguration before downgrading to 1.36

Versions/Systems Aected

CMC Version 1.36 or earlier for Dell PowerEdge VRTX

• Issue 6:

Description

When pinned cache is present, the controller failover feature does not work.

Resolution

Address the pinned cache before controller failover is allowed.

Versions/Systems Aected

All CMC versions including CMC 3.00 for Dell PowerEdge VRTX.

• Issue 7:

Description

While VD re-build operation is in progress, if SPERC controller fail-over is triggered, active alert for degraded VD is not displayed on the

Chassis Overview page.

Resolution

None. An active alert along with the CMC Log is generated for degraded VD (VDR8) before the SPERC controller fail-over is triggered.

After the SPERC controller fail-over occurs, the Active Alert message for degraded VD on the chassis overview page is cleared, but

SPERC functionality is not impacted.

Versions/Systems Aected

All CMC versions including CMC 3.00 for Dell PowerEdge VRTX.

• Issue 8:

Description

MCM Inventory report has limited RAID and NIC details. There is a dierence in the RAID and NIC inventory details on the Server

Component Update page and the MCM inventory report.

Resolution

In the CMC GUI, refer to the Server Overview > Update > Server Component Update page, it is accurate and current.

Versions/Systems Aected

All CMC versions including CMC 3.00 for Dell EMC PowerEdge VRTX.

Known Issues