Users Guide
NOTE: The Network Share option is enabled and the details are displayed in the Stored Proles section only if
the network share is mounted and is accessible. If the Network Share is not connected, congure the Network
Share for the chassis. To congure the Network Share, click Edit in the Stored Proles section. For more
information, see Conguring Network Share Using CMC Web Interface.
• Local or SD Card if the source le is on the Network Share.
For more information about the elds, see the Online Help.
3. Select Local, Extended Storage, or Network Share as the destination location based on the options displayed.
• If you select Local, a dialog box appears allowing you to save the prole to a local directory.
• If you select Extended Storage or Network Share, a Save Prole dialog box is displayed.
4. Click Save Prole to save the prole to the selected location.
NOTE: The CMC web interface captures the normal server conguration prole (snapshot of the server), which can be
used for replication on a target system. However, some congurations such as RAID and identity attributes are not
propagated to the new server. For more information on alternate export modes for RAID congurations and identity
attributes, see the white paper,
Server Cloning with Server Conguration Proles
, at DellTechCenter.com.
Editing Prole
You can edit the name and description of a server prole that is stored on the CMC nonvolatile media (SD Card) or the name of a
server prole stored on the remote share.
To edit a stored prole:
1. Go to the Server Proles page. In the Stored Proles section, select the required prole and then click Edit Prole.
The Edit Server Prole — <Prole Name> section is displayed.
2. Edit the prole name and description of the server prole as required and then click Edit Prole.
NOTE: You can edit the prole description only for proles stored on SD cards.
For more information, see the Online Help.
Deleting Prole
You can delete a server prole that is stored on the CMC nonvolatile media (SD Card) or on the Network Share.
To delete a stored prole:
1. In the Server Proles page, in the Stored Proles section, select the required prole and then click Delete Prole.
A warning message is displayed indicating that deleting a prole would permanently delete the selected prole.
2. Click OK to delete the selected prole.
For more information, see the Online Help.
Viewing Prole Settings
To view Prole settings for a selected server, go to the Server Proles page. In the Server Proles section, click View in the Server
Prole
column for the required server. The View Settings page is displayed.
For more information about the displayed settings, see the Online Help.
NOTE: The CMC Server Conguration Replication feature retrieves and displays the settings for a specic server, only if
the Collect System Inventory on Restart (CSIOR) option is enabled.
To enable CSIOR on:
• 12th generation servers — After restarting the server, when the company logo is displayed, select F2. On the iDRAC Settings
page, in the left pane, click Lifecycle Controller, and then click CSIOR to enable the changes.
100