Users Guide
• Sensor information
• Firmware build information
Supported Interfaces
• CLI RACADM
• Remote RACADM
• Telnet RACADM
racdump includes the following subsystems and aggregates the following RACADM commands. For more information about
racdump, see the RACADM Command Line Reference Guide for CMC in PowerEdge VRTX.
Table 41. Racadm commands for subsystems
Subsystem RACADM Command
General System/RAC information
getsysinfo
Session information
getssninfo
Sensor information
getsensorinfo
Switches information (IO Module)
getioinfo
Mezzanine card information (Daughter card)
getdcinfo
All modules information
getmodinfo
Power budget information
getpbinfo
KVM information
getkvminfo
NIC information (CMC module)
getniccfg
Redundancy information
getredundancymode
Trace log information
gettracelog
RAC event log
getraclog
System event log
getsel
Downloading SNMP Management Information Base File
The CMC SNMP Management Information Base (MIB) le denes the chassis types, events, and indicators. CMC enables you to
download the MIB le using the web interface.
To download the CMC's SNMP MIB le using the CMC web interface:
1. In the left pane, click Chassis Overview → Network → Services → SNMP.
2. In the SNMP Conguration section, click Save to download the CMC MIB le to your local system.
For more information about the SNMP MIB le, see the Dell OpenManage Server Administrator SNMP Reference Guide at
dell.com/support/manuals.
First Steps to Troubleshoot a Remote System
The following questions are commonly used to troubleshoot high-level issues in the managed system:
• Is the system turned on or turned o?
• If turned on, is the operating system functioning, not responding, or stopped functioning?
• If turned o, did the power turn o unexpectedly?
188