Users Guide
Deleting Scheduled Server Component Firmware Jobs
NOTE: To use this feature, you must have an Enterprise License.
You can delete jobs scheduled for the selected components and/or devices across one or more servers.
Deleting Scheduled Server Component Firmware Jobs Using the Web Interface
To delete scheduled server component rmware jobs:
1. In the left pane, click Server Overview, and then click Update.
2. On the Server Component Update page, lter the component or device (optional).
3. In the Job Status column, if a check box is displayed next to the job status, it implies that a Lifecycle Controller job is in progress
and currently in the indicated state. It can be selected for a job-deletion operation.
4. Click Delete Job. The jobs are deleted for the selected components or devices.
Updating Storage Component Using CMC Web Interface
Make sure the DUPs for the required storage components are downloaded.
To update the storage components:
1. In the left pane, click Chassis Overview → Storage → Update.
2. On the Storage Component Update page, click Browse.
The Choose to Upload File dialog box is displayed
3. Browse to location where the required DUP le was downloaded and saved from the Dell support Site and select the DUP le,
and click Open.
The DUP le name and path are displayed in the Browse eld.
4. Click Upload.
The DUP is uploaded to CMC. The Storage Component Update section displays only the components that are supported by
the downloaded DUP le. The current version, latest available version and the Update check box are displayed for the
components.
5. Select the appropriate Update check boxes for the required components.
6. Click Update.
The rmware update action is initiated for the selected components. The progress is displayed in the Update column
After the action is complete, an appropriate message is displayed to indicate the completion or failure of the rmware update.
NOTE:
• Servers must be turned o before updating the rmware.
• Component updates other corresponding components in the system similarly. For example The SPERC’s updates similarly
to the existing SPERCs and the EMMs updates similarly to the integrated EMMs.
• Click to view the HDD of dierent enclosures.
Recovering iDRAC Firmware Using CMC
iDRAC rmware is typically updated using iDRAC interfaces such as the iDRAC web interface, the SM-CLP command line interface,
or operating system specic update packages downloaded from support.dell.com. For more information, see the iDRAC User’s
Guide.
Early generations of servers can have corrupted rmware recovered using the new update iDRAC rmware process. When CMC
detects corrupted iDRAC rmware, it lists the server on the Firmware Update page. Complete the tasks mentioned in the Updating
Server iDRAC Firmware.
61