Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 3.2

file:///T|/htdocs/SOFTWARE/smdrac3/cmc/cmc3_2/en/readme/CMC_README.TXT[11/1/2012 10:20:49 AM]

######################################################################

DELL(TM) CHASSIS MANAGEMENT CONTROLLER VERSION 3.2

######################################################################

Version: 3.2

Release Date: 15 March 2011

This document contains updated information about the Dell Chassis

Management Controller (CMC).

For more information about the CMC, including installation and

configuration information, see the "Dell Chassis Management Controller

Firmware Version 3.2 User Guide" and the "Dell OpenManage(TM) Server

Administrator User's Guide." These documents are located on the Dell

Support website at "support.dell.com."

######################################################################

TABLE OF CONTENTS

######################################################################

This file contains the following sections:

* Criticality

* Minimum Requirements

* Release Highlights

* Known Issues

######################################################################

CRITICALITY

######################################################################

1 - Critical

######################################################################

MINIMUM REQUIREMENTS

######################################################################

======================================================================

SUPPORTED SYSTEMS

======================================================================

CMC version 3.2 is supported on the following Dell PowerEdge(TM)

systems in the Dell PowerEdge M1000-e system enclosure:

* Dell PowerEdge M600

* Dell PowerEdge M605

* Dell PowerEdge M610

* Dell PowerEdge M610X

* Dell PowerEdge M710

Summary of content (5 pages)

PAGE 1
###################################################################### DELL(TM) CHASSIS MANAGEMENT CONTROLLER VERSION 3.2 ###################################################################### Version: 3.2 Release Date: 15 March 2011 This document contains updated information about the Dell Chassis Management Controller (CMC). For more information about the CMC, including installation and configuration information, see the "Dell Chassis Management Controller Firmware Version 3.
PAGE 2
* Dell PowerEdge M710HD * Dell PowerEdge M805 * Dell PowerEdge M905 * Dell PowerEdge M910 ====================================================================== SUPPORTED WEB BROWSERS ====================================================================== CMC version 3.2 is supported on the following web browsers: * Microsoft Internet Explorer 7: Windows XP 32-bit SP3, Windows Vista SP2 x32 and x64 SP2, Windows Server 2003 SP2 x32 and x64, Windows Server 2008 SP2 x32 and x64.
PAGE 3
- 2.0.0 for Dell PowerEdge M710HD - 2.1.0 for Dell PowerEdge M910 - 2.3.1 for Dell PowerEdge M600 - 5.4.1 for Dell PowerEdge M605 - 2.3.3 for Dell PowerEdge M805, M905 * CPLD Version: - 1.0.3 for Dell PowerEdge M610, M610X, M710 - 1.0.0 for Dell PowerEdge M710HD - 1.0.1 for Dell PowerEdge M910 - 1.1.1 for Dell PowerEdge M600 - 1.1.
PAGE 4
server firmware versions be updated before using this feature. Refer to the "RECOMMENDED MODULE FIRMWARE VERSIONS" section for the proper version numbers. The modules should be updated in the following order: - BIOS - Lifecycle Controller - iDRAC6 * While using the command "racadm config -f" with: - CMC 3.2 or later versions of firmware, ensure that the Remote RACADM client version 6.3.0 or later is installed. - CMC with an earlier version of 3.
PAGE 5
Trademarks used in this text: "Dell(TM)", "OpenManage(TM)", and "PowerEdge(TM)" are trademarks of Dell Inc. "Microsoft(R)", "Windows(R)", "Windows(R) 7", "Windows Vista(R)", "Windows Server(R)", "Windows(R) XP", “Internet Explorer(R)”, and "Active Directory(R)" are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.