Owner's Manual

104 Using the RACADM Command Line Interface
Troubleshooting
Table 4-3 lists common problems related to remote RACADM.
Table 4-3. Using Serial/ RACADM Commands: Frequently Asked Questions
Question Answer
After performing a CMC
reset
(using the RACADM
racreset subcommand), I
enter a command and the
following message is
displayed:
racadm <subcommand>
Transport: ERROR:
(RC=-1)
What does this message
mean?
You must wait until the CMC completes the reset
before issuing another command.
When I use the RACADM
subcommands, I get errors
that I do not understand.
You may encounter one or more of the following errors
when using RACADM:
• Local error messages — Problems such as syntax,
typographical errors, and incorrect names. Example:
ERROR: <message>
Use the RACADM help subcommand to display
correct syntax and usage information.
• CMC-related error messages — Problems where the
CMC is unable to perform an action. Also might say
"racadm command failed."
Ty p e
racadm gettracelog for debugging information.