Owner's Manual

134 Using the CMC Web Interface
The Server Status page (separate from the Servers Status page) provides an
overview of the server and a launch point to the Web interface for the
Integrated Dell Remote Access Controller (iDRAC), which is the firmware
used to manage the server.
NOTE: To use the iDRAC user interface, you must have an iDRAC user name and
password. For more information about iDRAC and the using the iDRAC Web
interface, see the
Integrated Dell Remote Access Controller Firmware User’s Guide .
To view the health status of an individual server:
1
Log in to the CMC Web interface.
2 Expand Server Overview in the system tree.
All of the servers (1–16) appear in the expanded
Servers list.
3 Click the server (slot) you want to view.
The
Server Status page is displayed.
You can also view the server status page by clicking the status link in the
server Quick Links on the right side of the page.
Table 5-25. Individual Server Status - Properties
Item Description
Slot Displays the slot occupied by the server on the chassis.
Slot numbers are sequential IDs, from 1 through 16 (there are
16 slots available on the chassis), that help identify the location
of the server in the chassis.
Slot Name Displays the name of the slot where the server resides.
Present Displays whether the server is present in the slot (Yes or No). When
the server is absent, the health, power state, and service tag
information of the server is unknown (not displayed).