Owner's Manual

300 Using the CMC Directory Service
Logging into CMC Using Smart Card
NOTE: You cannot use the IP address to log into the Single Sign-On or
Smart Card login. Kerberos validates your credentials against the Fully
Qualified Domain Name (FQDN).
To log in to CMC using Smart Card:
1
Log into the client system using your network account.
2 Access the CMC Web page using
https://< cmcname.domain-name >
For example, cmc-6G2WXF1.cmcad.lab
where cmc-6G2WXF1 is the cmc-name
cmcad.lab is the domain-name.
NOTE: If you changed the default HTTPS port number (port 80), access the
CMC Web page using < cmcname.domain-name >:< port numbe r>, where
cmcname is the CMC host name for CMC, domain-name is the domain name,
and port number is the HTTPS port number.
The CMC Single Sign-On page is displayed prompting you to insert
the Smart Card.
3 Insert the Smart Card into the reader and click OK .
The
PIN pop-up dialog box is displayed.
4 Optionally, select a session timeout. This is the amount of time you stay
logged in with no activity. The default value is defined as the Web Service
Idle Timeout. See Configuring Services for more details.
5 Enter the PIN and click OK .