CLI Guide

cfgADGcRootDomain (Read/Write)
Table 268. Details of cfgADGcRootDomain
Description The name of the Active Directory root domain used for DNS look
up, to locate Global Catalog servers.
Legal Values String. Maximum character length = 254
Default Null
cfgADGcSRVLookupEnable (Read/Write)
Table 269. Details of cfgADGcSRVLookupEnable
Description Determines how the global catalog server is looked up. If using
pre‑configured global catalog servers, then CMC uses the values
cfgAdGlobalCatalog1, cfgAdGlobalCatalog2, and
cfgAdGlobalCatalog3.
Legal Values • 0(FALSE)—use pre‑configured Global Catalog Servers (GCS)
• 1(TRUE)—use DNS to look up GCS
Default 0
cfgADSpecifyServerEnable
Table 270. Details of cfgADSpecifyServerEnable
Description Allows you to enable or disable and specify an LDAP server or a
global catalog server. Use cfgADDomainController or
cfgADGlobalCatalog to specify the IP address.
Legal Values • 1 (enabled)
• 0 (disabled)
Default 0
cfgLDAP
This group allows you to configure settings related to the Lightweight Directory Access Protocol (LDAP).
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
NOTE:
For CMC, you can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option.
The following sections provide information about the objects in the cfgLDAP group.
cfgLDAPEnable (Read/Write)
Table 271. Details of cfgLDAPEnable
Description Turns LDAP service on or off.
150 CMC Property Database Group and Object Descriptions