CLI Guide

cfgChassisPower
This group is applicable only to CMC and contains parameters to display or configure power for the chassis.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgChassisPower group.
NOTE: While configuring chassis power from a file, update the value for one chassis power cap property and remove the
values for the other chassis power cap properties or, update the last percentage value as it is applicable to all chassis
power cap properties. The chassis power cap properties are: cfgChassisPowerCap, cfgChassisPowerCapF,
cfgChassisPowerCapBTU, cfgChassisPowerCapFBTU, cfgChassisPowerCapPercent, and
cfgChassisPowerCapFPercent.
cfgChassisInPower (Read Only)
Table 299. Details of cfgChassisInPower
Description Indicates the cumulative input power consumption data (in Watt and BTU/hr) captured from all
healthy and functional PSUs in the chassis.
Legal Values None
Default None
cfgChassisPeakPower (Read Only)
Table 300. Details of cfgChassisPeakPower
Description Indicates the maximum system input power consumption (in Watt).
Legal Values
Default
cfgChassisPeakPowerTimestamp (Read Only)
Table 301. Details of cfgChassisPeakPowerTimestamp
Description The timestamp recorded when the peak input power consumption
value occurred.
Legal Values
Default
cfgChassisMinPower (Read Only)
Table 302. Details of cfgChassisMinPower
Description The minimum system input power consumption value (in Watt) over the time since the value was
last cleared.
Legal Values None
158 CMC Property Database Group and Object Descriptions